True/False Indicate whether the statement is true or false.
|
|
1.
|
A single-ended fiber optic cable test allows finding a bad connector on just one
end of a cable.
|
|
2.
|
Manufacturers test connectors by cutting a fiber and inserting two connectors to
create a connection and measuring the loss.
|
|
3.
|
Some fiber optic networks can be tested by connecting a loopback attenuator
between the output and input ports of the fiber optic transceiver.
|
|
4.
|
CD and PMD testing are only required on very long singlemode telco
networks.
|
|
5.
|
FTTx PON splitters can be tested with an OTDRexactly like other fiber optic
networks.
|
Multiple Choice Identify the choice that best completes the statement or
answers the question.
|
|
6.
|
Optical fiber attenuation coefficient is measured in ______.
|
|
7.
|
The attenuation of fiber _________ with longer wavelengths.
A. | Increases | B. | Decreases | C. | Stays the
same |
|
|
8.
|
A __________ removes higher order modes from multimode fiber to set proper test
conditions.
A. | Claddig mode stripper | B. | Mode scrambler | C. | Mode
filter |
|
|
9.
|
The performance of an optical link is measured as BER (bit error rate) which is
dependent on ________.
A. | Transmitter type | B. | Transmitter power | C. | Cable plant
loss | D. | Received optical power |
|
|
10.
|
To measure optical power in a fiber optic network, the meter must be set to read
______.
A. | dB | B. | dB at the proper wavelength | C. | dBm at the proper
wavelength | D. | dBm at any wavelength |
|
Multiple Response Identify one or more choices that best complete the
statement or answer the question.
|
|
11.
|
What are the methods of measuring fiber attenuation?
|
|
12.
|
In order to test the attenuation of multimode fiber accurately, one must control
_______ and ________.
|
|
13.
|
Which instruments can measure reflectance from a connection or splice?
|
|
14.
|
Which two networks have high optical power that requires special power
meters?
|